Datapath Express9 Manuel d'utilisateur télécharger pdf (Page 8)

8 09/03/2011

Connecting a Host Machine to an Expansion

Chassis

The Express9 can be used as an expansion chassis providing you have the following

accessories:

H-Link card

S-Link card

Ex-cable

Power down the host machine and insert the H-Link card into a free x8 PCIe slot.

Insert the S-Link card into the PICMG1.3 SBC slot on the Express9 as shown in the diagram

above. The S-Link card should occupy the first half of the PICMG1.3 slot (connectors A and

B).

Connect the H-Link and S-Link cards using the Ex-cable.

When powering up the host machine the expansion chassis will power up automatically, the

LED for the PICMG1.3 slot containing the S-Link card will flash indicating that a successful

link has been made between the host machine and the expansion chassis.

Note:

When inserting PCI cards into the host machine or expansion chassis, ensure the

system is powered down prior to any cards being installed.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Datapath Express9 Manuel d'utilisateur Page 8